HK Audio CTA118S SUBWOOFER AMPLIFIE 18"
Produits apparentés
- Description
- Spécifications
- Commentaires
Description
Description du produit
An active, direct-loaded subwoofer, the 18“ CTA 118 SUB serves as the system’s powerful engine room. All the required circuitry is on board, including a 56-bit DDO-Pro™ digital controller and two 1,000-watt RMS PWM power amps. One of the power amps drives the subwoofer’s 18“ speaker; the other is configured by the controller to drive a CTA 208 mid/high unit or a ConTour Series™ CT 108, CT 112 or CT 115 enclosure.
The internal electronic circuitry is shock-mounted on rubber grommets, while a dolly facilitates transport and affords additional protection against damage and dirt.
Caractéristiques du produit
- Sensitivity 1W@1m (Half Space): 101 dB
- Max. SPL peak (Half Space): 133 dB
- Frequency response +/-3 dB: 42 Hz – fx
Spécifications
Spécifications du produit
| FREQUENCY | ||
| Response +/- 3 dB | 42 Hz – fx | |
| Response -10 dB | 36 Hz – fx | |
| Sensitivity 1W | 101 dB | |
| Maximum SPL, @ 10% THD | 130 dB @ 10% THD (half space) | |
| Crossover | 100 Hz - 130 Hz, controlled by controller | |
| GENERAL | ||
| Subwoofer amplifier | 1000 W RMS, Class D | |
| Sat & Mid/high unit amp | 1000 W RMS, Class D | |
| Active protection circuits | DDO™ Pro Limiter, thermal protect, short-circuit | |
| Connections | XLR female, electronically balanced & floating, DDO-Pro™ Net/ RS 485 Ethercon | |
| LF Speaker | 18" | |
| Pole mount | M20 plate | |
| Handles | 7, integrated | |
| Enclosure | Birch plywood 18mm, 13- ply | |
| Grille | Metal grille with acoustic foam | |
| Finish | Black polyurethane lacquer | |
Vous voyez une erreur sur cette page? Faites-le nous savoir.
